Plastic Height Adjusters Pack 10 | Elevated/ off contact printing accessory to raise height/ support frames | Pack Jig Hinges/ Clamps

Supports Frames/ Hinges/ Jig Arms during printing

NEHOCSKU: S-9112


Adjust height of frames and support frame edges during elevated/ off contact printing applications. 1mm plastic easy to cut to size, low cost and durable. The straight edge suitable for corner registration guides when using jig hinge clamps.

$3.30

RRP $3.95
SAVE $0.65
In Stock

Durable and low cost, the plastic sheets are easily cut to size to elevate the height of frames and support frame edges during elevated/ off contact printing applications.

The straight edge is also suitable for use as corner registration guides when printing flat items using jig hinges.

Used again and again, this simple addition will become a regular product used during your screen printing applications.

Usage

  1. Score plastic to required width/ size using a sharp blade or knife.
  2. Snap plastic at score marks to create required Height Adjusters.
  3. Place Height Adjusters under frame in corners to elevate the frame to required height.
  4. When the correct height has been achieved, tape Height Adjusters to frame in position using Screen Masking Tape.

Jig Hinge Clamp usage

When using Jig Hinge Clamps (Product Code SPJ-H), small thin strips of height adjusters are required to be placed above the plastic frames for the clamp to operate due to the frame registration lip on the hinge.

Quantity: Pack 10
Size: 120x180mm (rounded corners)
Material: ABS styrene plastic

 

SKU S-9112
Barcode # 9334315000129
Brand NEHOC
Shipping Weight 0.3800kg
Shipping Width 0.120m
Shipping Height 0.010m
Shipping Length 0.190m
Shipping Cubic 0.000228000m3
Unit Of Measure ea

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law (ACL). You are entitled to a replacement or refund for a major failure. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Should you receive a product that does not meet your expectations, you may return it for a refund or exchange - prior to opening or using the product.

Where products have been opened or used, suitability of usage has been determined and no refund is available for change of mind purchases on used products. This does not exclude warranty claims where product may be faulty or contain a manufacturing fault. Visit the Warranty Support section.

Calculate Shipping