MiScreen 120Mesh 5M Roll | Makes: 20 Half/ 12 Full | RISO Digital QS Mesh | Roll format cut to size as required.

MiScreen Digital Mesh is 28cm wide for MiScreen Frames

MiScreenSKU: QS-120P-28-5


120Mesh RISO Digital QS Master for use in MiScreen model. Best for all textiles, t-shirts, fabrics, cotton, polyester, lycra, canvas, neoprene, poly-cotton blends. Also suitable for paper, wood and ceramics.

$149.60

RRP $169.95
SAVE $20.35
In Stock

In Stock
Buy In Bulk & Save!
Buy 2 or more: Pay $145.86

120Mesh RISO Digital QS Master for use in MiScreen model.

Best for textiles, t-shirts, fabrics, cotton, polyester, lycra, canvas, neoprene, poly-cotton blends.
Also for finer details onto paper, wood and ceramic.

Suitable for designs onto glass, metal, plastics and non-absorbent materials, however test for suitable application first as mesh may leave mark. (if surface not suitable use 200Mesh).

Note: New white cardboard storage tube. End caps may vary either red (as pictured) or white depending on available supply.

Mesh Grade Explained

120Mesh is the sweet spot for almost all printing and applications using the MiScreen system, with sharp lines and solids available from the one grade onto all fabrics and materials, only non-absorbent materials (glass/ metal/ plastic), may require a 200Mesh to print ultra fine designs.

70Mesh / 28T - Coarse grade for high volume ink flow (lower quality) for supercover inks, high solid backgrounds on fabrics.
120Mesh / 47T - High versatile mesh for solids/ shading/ fine lines onto almost all materials and substrates, t-shirts, paper, ceramics, silk, cotton & polyester materials, canvas.
200Mesh / 79T - Designs onto glass, metal, plastics and gloss paper. Ultra fine designs, best for shading. (Not recommended for supercover onto fabrics).

The finer the mesh grade does not always provide a finer quality print onto your material, as some inks contain coarse pigments or bases that do not allow flow through 200Mesh screen without blocking/ drying, where as, using a coarse 70Mesh onto non-absorbent materials will allow greater ink flow, yet likely provide a coarser edged printing (mesh mark is visible).

 

Usage

When using solvent ink, test suitability beforehand.

'P' Digital QS Master is not suitable for use with Print Lamp or Thermal-Copier imaging systems.

Use only MiScreen, GOCCOPRO QS200, RISO ScreenFax SP-275, SP-265, SP-180 or RISO MG-11 models.

 

Storage

RISO QS Mesh is a thermal material and must be stored in a cool dry place away from sunlight and heat.
- Store below 35°C (95°F), away from direct sunlight.
- Do not store near heat or in high humidity.

120Mesh Grade: 120 threads per inch (#47T threads per cm)
Width: 28cm (11in)
Length: 5 Metres (16.4ft)
Type: 'P' Digital QS Master
Mesh Colour: Pink
Manufacturer: RISO Kagaku Corp, Japan

Each roll is suitable to create:
20 x A5 Half Frames @25cm length
12 x A4 Full Frames @41cm length

SKU QS-120P-28-5
Barcode # 9334315013686
Brand MiScreen
Shipping Weight 0.1300kg
Shipping Width 0.320m
Shipping Height 0.070m
Shipping Length 0.070m
Shipping Cubic 0.001568000m3
Unit Of Measure roll
Type RISO Digital 'P' Type Mesh

This product is a consumable item, supplied with standard product warranties against faulty manufacture and suitability of usage.
​Product is thermally reactive and requires correct storage from heat (below 35°C) and high humidity to remain suitable for use.

Calculate Shipping