NEHOC A3 HiRes Spirit Paper Carrier | Studio Quality | High Resolution

A3 Size, high resolution carrier for sharper results

NEHOCSKU: R-TCA3 1 Review


HiRes Carriers use a commercial grade polycarbonate, bound using high temperature Kapton tape. For file lines and sharpest results onto Spirit tattoo paper and S8 Spirit Paper.

$19.80

RRP $22.50
SAVE $2.70
In Stock
Buy In Bulk & Save!
Buy 3 or more: Pay $18.81
Buy 6 or more: Pay $17.82

HiRes Carrier are used for fine lines and sharp results using a special trade quality polycarbonate to allow the maximum IR penetrate.

Bound using high temperature Kapton tape, the carrier is the same both sides, giving you double the carrier life, however the poly construction will mark and scratch easily compared to Teflon Carriers. For this reason they are not recommended for daily general usage in a studio.

- Trade quality polycarbonate cover for sharp results
- High temperature Kapton tape header tape
- Cut header corners to avoid jamming
- Use either side (doubles the carrier life) 
- Protective storage envelope

Homemade carriers cause problemsProblems with homemade carriers

Patchy results, faint edges, graining, blurring, jamms and melting . . .there's a long list of problems we hear all the time.

It's not the light tattoo copiers use to make a spirit stencil - it's a high frequency IR reacting with the carbon in the design, so if your plastic absorbs the IR wavelengths you get poor results.

Pictured right is a home made carrier taped together with faint edges - caused by the plastic absorbing the IR, the further from the middle the fainter the IR and it's not evenly absorbed.

HiRes Carriers are tested

Our Carriers are tested and workThe high grade polycarbonate allows the IR to pass through onto your spirit paper to provide sharp retuls.

Solid designs, fine lines and consistent copies is what your after and what a NEHOC HiRes Carrier will provide.

Don't piece together 2 pieces of plastic at home, it may be cheaper, but that's not how thermal-copiers work and you will receive poor quality results and waste both your artwork and the spirit paper.

Worse still, you may stick/ jam the carrier onto the glass roller with tape that isn't heat resistant (and melts) causing serious damage to the machine.

HiRes carriers use high temperature rated Kapton Tape that will not melt, even if the carrier gets stuck.

Note: A4 Thermal-Copier Machine is for illustration/ application/ usage purpose only and not included or part of this sale.

Cove/ Backing: Trade Polycarbonate
Header: Kapton Tape (High temperature rated)
Code: R-TCA44
Size: 450 x 310mm
Storage: Bag with instructions
Pack: Each

SKU R-TCA3
Barcode # 9334315030508
Brand NEHOC
Shipping Weight 0.1500kg
Shipping Width 0.310m
Shipping Height 0.005m
Shipping Length 0.450m
Shipping Cubic 0.000697000m3
Unit Of Measure ea

Calculate Shipping