EZIscreen Textile Film - Pack 2 plus Artwork Transparency | U.V. Exposure + Water | Non-toxic Chemical Free Screen Making

UV Coated Film Replaces StencilPro, USA manufacture.

EZIscreenSKU: EZI-TF2


EZIscreen Textile Film has no adhesives and can be taped onto your item or attached to a frame/ screen for printing. New improved UV photosensitive emulsion pre-coated evenly across the film requires UV Exposure (not sunlight). Replaces StencilPro Films.

$27.50

RRP $29.95
SAVE $2.45
In Stock
Buy In Bulk & Save!
Buy 2 or more: Pay $26.12

EZIscreen UV Exposure Stencil Films - Replaces StencilPro

Manufactured to the highest industry standard in the USA, EZIscreen films replace the older generatrion SPO and StencilPro film with all new features and benefits:
- Increased mesh count to 120Mesh (#47T silk screen mesh)
- New improved trademarked photosensitive emulsion pre-coated evenly across the mesh.
- New coating keeps the mesh tight and straight
- 50% increase in film shelf life. Up to 18 months best before (film still does not expire at that time).

Use your designs to create custom stencils and print freehand using this adhesive backed stencil film, little equipment is required to begin with high quality fine detailed results.
NB: Blue Stencil Film illustrated below, Textile Film is purple in colour.

Pint Artwork Transparency Expose under UV Lamp Washout design from emulsion Print Freehand or Mount to a frame PDF Quick Start Guide explains it all
Easy Artwork Creation Fast UV Exposure Simple Washout  High Quality Results View Quick Start Guide

- Use your own designs and artwork, internet images or hand drawn artworks, quickly and easily printed onto Artwork Transparencies (or hand draw direct onto the Transparency).
- No chemicals or diazo mixings, no coating emulsions onto a screen, plus no storing the mix (or disposing of the chemicals) after use.
- No time consuming hand cuttings of films, that provide low quality results with no fine lines or graphics and bridges to lettering (army lettering)
- Fast exposure using a UV-A wavelength matched to the films emulsion.
- Fast washout without high pressure bays or equipment.

 

Difference between Ikonart and EZIscreen films

Size. Ikonart are standard US 10x12", EZIscreen are custom 8.5x10" to match the previous SPO series of frames and accessories for existing customers.

SPO/StencilPro Film - what happened?
'StencilPro Orange' was an evolution of the original 'StencilPro Red', however the manufacturing company (Circuit Bridge LLC, USA) ceased trading in 2020 when the owner passed away suddenly, with all product immediately discontinued. Details - https://www.screenprintingshop.com.au/stencilpro-film-discontinuation/

 

Stencil and Textile - what is the difference?

Stencil Films have an adhesive backing applied so they attach/ adhere directly to items for direct printing applications using a squeegee/ brush/ sponge/ spray - example, cardboard cartons, wood, canvas artwork.

Stencil Film also prints t-shirts and fabrics, however the adhesive will adhere to the fibres and which may lead to fibres lifting and blocking fine areas of the back of the stencil for printing. The more the fibres in the material the faster blocking may occur, for this reason we recommend for t-shirts and fabrics using the non-adhesive Textile Film.

Textile Film without an adhesive may be used freehand by simply taping to an item similar to a stencil, or more traditionally is mounted to a frame using double sided tape/ masking tape which provides a higher tension for screen printing
- Mounting to a frame is required for printing supercover fabric inks, as they must be printed off contact.
- Mounting helps eliminate movement/ blurring/ smudging when printing.

When printing multiple items, repeat designs, using a jig or multi-coloured, mounting to a frame makes printing faster and more accurate.

 

EZIscreen Film Exposure Guide

Exposing your EZIscreen Film works by using artwork to block the UV light, hardening the areas of the film that aren't blocked, and leaving the areas that are blocked water-soluble. Therefore, anything that will block the light from hardening the film can be used as "artwork".

First place to start is the Quick Start Booklet.

If your a visual learner, there's a range of videos online, or go straight to the Exposure Cheat Sheet.

EZIscreen Films are precoated with a UV emulsion which hardens when the correct wavelength of UV-A light is projected.
Our UV Exposure Lamp is available separately and matched to the film's emulsion with the recommended exposure distances and times.

 

Use High Density Artwork

It is recommended Artwork Transparencies be used for all EZIscreen Film exposures.
Do not use papers that will block the UV.

When you print your artwork, it is important that the black areas can block ultra-violet light and are 'high density'.

Toner that looks dense may actually be closer to translucent in its ability to block UV light. A simple test: hold the artwork up to a light source (sunny window, lamp, etc.). If you can see any light through the black areas, the artwork is not dense enough and will not produce a good stencil.

For an example of high density, hold a piece of black construction paper up to a light source. No light will bleed through. This is the density your artwork should provide.

 

Pack Quantity: 2 Sheets + 2 A4 Artwork Transparency Sheets
Sheet Size: 8.1x11" / 216x279mm
Mesh Grade: 120Mesh  / #47T
Colour: Purple
Adhesive Backed: No
Storage Bag and Instruction Envelope.

Print Size

Max Image Size: 214 x 275mm
Recommended Print Size Mounted to Frame: 170x230mm
Max Print Size Mounted to Frame: 175x245mm
Suitable Frame: FM-180x250/ FP-180x250
Suitable Squeegee: SQ-P6/ SQ-170/ SQ-240

 

SKU EZI-TF2
Barcode # 9334315037743
Brand EZIscreen
Shipping Weight 0.1000kg
Shipping Width 0.220m
Shipping Height 0.005m
Shipping Length 0.330m
Shipping Cubic 0.000363000m3
Unit Of Measure Pack
Type Replaces discontinued SPO & StencilPro

EZIscreen film is a consumable product with a long shelf life, however will degrade when opened and exposed to UV light sources. Refer to website warranty section for EZIscreen Film specific conditions and suitability of usage.

This Envelope Pack is supplied for use within a recommended 6 months of purchase. No claims for faulty manufacture recognised after 30 days from original purchase.
Incorrect exposure of film to U.V. does not validate a warranty claim as this is against proper handling and usage instructions. Once pack is opened, the customer accepts suitability of usage warranty. The customer must ensure the product is opened away from light and stored correctly as per the instructions and usage guide. Product remains warranted against faulty manufacture.

Using Custom UV Lamp
The emulsion coating on EZIscreen Film is formulated to expose using a 30W/395~400nm UV-A lamp. If using an alternate UV Lamp or light source, where wattage/ wavelength/ exposure distances differ, so too will recommended exposure time parameters, requiring tests first. Altering standard exposure parameters is not supported or recommended and outside all guides, manuals and proper operation of the product.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law (ACL). You are entitled to a replacement or refund for a major failure. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Where products have been opened or used, suitability of usage has been determined and no refund is available for change of mind purchases on used products. This does not exclude warranty claims where product may be faulty or contain a manufacturing fault.

Calculate Shipping